Bilbatterilader - Starthjelper - 12/24 V - 100 A - Kompakt

If you only use a car for short drives during winter, the dynamo doesn’t run for a long enough time and this can affect the car battery. The professional, compact MSW heavy duty battery charger allows you to easily jump start engines in a workshop or your own garage. The charger even meets high current requirements up to 100 amps (arithmetic).

The car battery charger S-CHARGER-65A has a jump start function which is a particularly useful feature. The jump starter means that you will be ready for any eventuality, whether for the starting of a gasoline or the preheating of a diesel engine. The charger has a maximum starting current of 480 A and ensures that the engine starts quickly even when the car battery is empty. The battery has little chance to charge properly in car repair shops, where the engine is often started only for a short time. This device has a quick start-up aid, which only needs a maximum of 12 watts.

The construction of the car battery charger is especially practical. In every workshop or garage, it is particularly useful if everything has its own location. The charger has special pockets for stowing the long charging cable. Spending a lot of time searching for power cables is a thing of the past. The cables included in the delivery are between 1.5 and 2 metres long. The Plus-Pole cable is 2 metres long, the Minus-Pole cable 1.8 metres and the power cable is 1.5 metres long.

The battery charger has a timer with a time range of up to 60 minutes for quick-charging. You can charge an empty battery in just one hour. The timer allows you to take care of other tasks until the charging is completed. The device will turn off automatically after 60 minutes, so that you can leave it unattended.

With a weight of 22 kilograms, the charger is no lightweight, but its practical wheels make for a very convenient transportation. You can easily roll it from one car to the next. A matching handle makes this particularly easy. You can also use the handle to simply lift the charger into the car if you want to use it at another location.

A reliable fuse protects against ignition sparks or short circuits while the charger is connected to the car battery. Due to the cooling system, which is equipped with two fans and has cooling slots on the housing, you can use the device for hours.

The charger has a large, three-digit LED display on the front panel, which allows you to directly read the current setting of the car battery charger, even if you are a little further away from the device.