
Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Leverandør: Stamos Germany | Artikkelnummer EX10020210 | Modell: S-PLASMA 40
Produkt-highlights
- integrated air compressor
- Cutting current 20-40 A
- Cutting thickness: 10 mm
- Overload protection
- V MOSFET technology
- A high-performance plasma cutter for workshops, garages and metal fabrication facilities
- Cuts conductive materials such as steel, stainless steel, cast iron, copper, nickel or aluminium
- Integrated air compressor: no external compressed air supply necessary
- Precise and distortion-free cuts up to 10 mm thickness
- Overload protection ensures a high degree of safety and immediately turns off the device if necessary.
The plasma cutter S PLASMA 40 from Stamos Germany cuts electrical conductive materials such as steel, stainless steel, cast iron, copper, nickel or aluminium precisely and without deformation and captivates the market through the use of the integrated air compressor. This reliable and experienced technology ensures always a high level of safety within the working environment. This professional device cuts up to 10 mm cutting capacity up to 40 amps and is ideally suited for repair or renovation work in workshops or garages.
The compact and lightweight design allows for an easy and mobile use.
The cutting or separating of the metals takes place by means of a plasma jet (compressed air) rather than by the use of expensive gases such as argon or nitrogen. The infinitely variable adjustability allows precise control of the cutting current. Due to the high temperature and cutting speed, distortion of the material is minimized and a clean straight cut edges is ensured, therefore no post-processing is needed.
A special feature of the S-PLASMA 40 plasma machine is the integrated compressed air compressor. The advantage compared with traditional systems is that no external source of compressed air is needed and thus no additional devices need to be purchased. This professional device is ideal for mobile use and is easy to transport due to the carrying handle
The device is equipped with the modern V-MOSFET inverter technology, which ensures that the current is used optimally and that damage caused by overvoltage is prevented. The knob is used for continuous adjustment of the cutting current in the range of 20 to 40 amps. With the switch, the after-flow time is selected between 2,5 and 5 seconds.
In addition to the plasma cutter S PLASMA 40, you also receive useful and extensive accessories: a hose packet with torch (type :) PT-31 length: 4 m), a ground cable with clamp (length:) 3 m), 3 ceramic nozzles, 3 ceramic rings, 3 electrodes, 3 cutting nozzles, a tool kit and an instruction manual are supplied.
- Plasma cutter S PLASMA 40
- Tool bag
- Ground cable with clamp (3 m)
- Hose package with cutting torch (4 m)
- Power cable (1.9 m)
- 3 x ceramic nozzles
- 3 x ceramic rings
- 3 x electrode
- 3 x cutting nozzles
- User manual
Sveiseapparatet bruker MOSFET-teknologi. Denne teknologien gjør at sveiseapparatet har en energiytelse og virkningsgrad på 93 %. Man sikres høy sveisningskvalitet ved at maskinen har konstant strømforsyning og oppnår derfor en perfekt sveisesøm.
Se merVis færreKraftfulle vifter til nedkjølning og beskyttelse mot overoppheting.
Ved plasmaskjæring behøver man en gass som blåser bort smeltet metall fra skjæresnittet. Trykkluft er her en vanlig løsning. Plasmaskjæreren har mulighet til å koble til en kompressor.
Se merVis færrePå baksiden av hvert sveiseapparat kann du finne en skrue med jordingsmerking. Før bruk må apparatet jordes med en jordkabel med en tykkelse på minst 6 mm².
Se merVis færre
Apparatet har en 1-fase-tilkobling (230 V +/- 10 %).
Tiden etter endt sveising der gassen strømmer fra brenneren for at den skal bli nedkjølt og beskytter sveisesømmen mot oksidering.
Plasmalysbuen smelter metallet og blåser det til side av lufttrykkets kinetiske energi.
Ved overbelastninger eller feil vil denne LED-lampen lyse.
Bon produit, bon rapport qualités prix
Satisfait du poste de découpe pour mon utilisation en métallerie ! par contre le capot a subit un enfoncement a la préparation de l expédition et non au transport car l'emballage était intact.

Fortsatt usikker?
Våre eksperter står klar til å hjelpe.- integrated air compressor
- Cutting current 20-40 A
- Cutting thickness: 10 mm
- Overload protection
- V MOSFET technology
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma Cutter - 40 A - 230 V - Inbuilt Pneumatic Air Compressor
Varen er på lager, leveringstid ca. 7-10 arbeidsdager
- integrated air compressor
- Cutting current 20-40 A
- Cutting thickness: 10 mm
- Overload protection
- V MOSFET technology
- Plasma
- POWER
- 400 V
- Skjærestrøm: 20 - 70 A
- Skjæreevne 20 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasmaskjærer - 70 A - 400 V - Pilottenning
Varen er på lager, leveringstid ca. 7-10 arbeidsdager
- Plasma
- POWER
- 400 V
- Skjærestrøm: 20 - 70 A
- Skjæreevne 20 mm
- Plasma
- Power
- 230 V
- Cutting current: 10 - 50 A
- Cutting thickness: 12 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma Cutter - 50 A - 230 V
Varen er på lager, leveringstid ca. 7-10 arbeidsdager
- Plasma
- Power
- 230 V
- Cutting current: 10 - 50 A
- Cutting thickness: 12 mm
- CUT 30 / 40 / 50 reservedeler
- Keramikkdyser: 3x
- Elektroder: 12 x
- Skjæredyser: 12 x
- Keramiske ringer: 3x
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma - reservedelssett - CUT 30 40 50 - middels
- CUT 30 / 40 / 50 reservedeler
- Keramikkdyser: 6x
- Elektroder: 24x
- Skjæredyser: 24x
- Keramikkringer: 6x
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma reservedeler - CUT 40 50 - stor
- Synsfelt: 98 x 55 mm
- Lysbeskyttelse DIN 9 - 13
- Egner seg for alle sveisere
- Tid fra lys til mørk 1/30.000 s
- Forsinkelse ved opplysning
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Sveisehjelm - BLASTER - ADVANCED SERIES
- Erstatningsdeler for CUT 40 / 50
- Keramiske dyser: 2x
- Elektroder: 4x
- Skjæredyser: 4x
- Keramiske ringer: 2x
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasmaerstatningsdelesett - CUT 40 60 - lite
- 10 sett erstatningsbeskyttelseslinser
- Metalator, BlackONE, Carbonic, Legend
- Polykarbonat
- Gjennomsiktig
- 130 x 100 x 20 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

10 sett beskyttelseslinse - Metalator/BlackONE/Carbonic/Pokerface/Legend
- Plasma
- BASIC
- 230 V
- cutting current: 20 - 50 A
- cutting thickness: 0 - 14 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma Cutter - 50 A - 230 V - Basic
- Skjærestrøm: 20 - 45 A.
- Skjæredybde opp til 15 mm
- HF tenning / IGBT
- 2 T / 4 T bryter
- 230 V
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasmaskjærer - 45 A - 1 V - HF tenning
- Skjærestrøm: 15–40 A
- Driftssyklus 60 %
- Skjærekapasitet opptil 12 mm
- Digital menynavigering
- 2 T / 4 T
Varen er på lager, leveringstid ca. 6-10 arbeidsdager

Plasmaskjærer - 40 A - digital - pilotbue
- Plasma
- Power
- 230 V
- Cutting current: 10 - 50 A
- Cutting thickness: 12 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasma Cutter - 50 A - 230 V
- Plasma
- SELECTION
- 400 V
- Skjærestrøm: 20 - 85 A
- Skjærebredde: 0 - 27 mm
Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Plasmaskjærer - 85 A - 400 V - Pilottenning