MC-løfter- 450 kg - 220 x 68 cm

The MSW-MHB-450-780.2 motorcycle lift from MSW Motor Technics has a load capacity of 450 kg, therefore leaves nothing to be desired when needing to lift a motorcycle to a comfortable working height for repair, installation or maintenance.

The motorcycle is simply pushed onto the platform via a ramp. In the front area, the bike is fixed with a wheel holder. There are also four U-shaped clips on the mounting platform, which can be used to secure the motorcycle with a tensioning belt.

At the rear of ​​the motorcycle lift is a wheel changing chute which is covered with a mounting plate, which can be removed. This can be used to carry out maintenance work on the rear wheel. No power connection is required for lifting or lowering of the work platform as the lift is simply operated with two foot pedals, reaching a height between 18 and 78 cm. The lowering speed can be adjusted for a precise and safe lowering of the motorcycle.

With a working area of ​​220 x 68 cm, the platform offers plenty of room to perform a variety of maintenance and repair tasks upon a motorcycle. It is also suitable for motorcycles with side rails. It has a ribbed surface on which the motorcycle can be safely pushed. A front wheel guide provides additional safety when fixing the front wheel to the clamp.

The front wheel clamp with a width of 7 to 18 cm consists of a vice, a comfortable crank and two clamping jaws, which fix the front wheel firmly before the motorcycle is securely fastened to the platform by means of tensioning straps. The clamping jaws are covered with rubber, which means that the wheels remain protected during fastening.

The motorcycle lift is equipped with four wheels, two of which are rotatable so that the lifting platform can be moved and place easily. Two ground screws are provided for a secure position, with which the front wheels can be lifted to prevent slipping and to compensate for uneven surfaces.