Dent puller spot welder med arbeidsbenk - 4000A
13899,00 NOK Inkl. mva

Dent puller spot welder med arbeidsbenk - 4000A

Leverandør: MSW | Artikkelnummer EX10060442 | Modell: S-SPOTTER 4000

Dent puller spot welder med arbeidsbenk - 4000A
Dent puller spot welder med arbeidsbenk - 4000A
Dent puller spot welder med arbeidsbenk - 4000A
Dent puller spot welder med arbeidsbenk - 4000A
Dent puller spot welder med arbeidsbenk - 4000A
Dent puller spot welder med arbeidsbenk - 4000A
360° foto
Klikk for å se bildene
13899,00 NOK
eller

636,46 NOK /måned /mo with Klarna

Lær mer

Inkl. mva

  • Gratis forsendelse til Norge

    ?

    Varen er på lager, leveringstid ca. 6-10 arbeidsdager

  • 30 dagers returrett

    ?
  • 3 års garanti

Produkt-highlights

  • Welding current 4000A
  • Digital display
  • Automatic/manual operation
  • Welding time 0.2–2s
  • 3 welding current settings

The chassis spotter operates mainly via spot welding. Discs or dinging stars are welded precisely onto the tin bulge, in order to straighten out the damaged area with a high-speed dinging hammer. The dent puller S-SPOTTER 4000 has three different settings and a timer. This means that it adjusts to many different needs.

Se mer Vis færre

The supplied attachments allow you to weld triangular or round washers, pins, screws and corrugated wire onto the damaged area and straighten the dents out with a dinging claw or a hook.

Se mer Vis færre

The precise settings can be adjusted via a rotary knob, quickly and efficiently. In the automatic mode, the welding current goes up to 4000A in a predetermined timeframe. In the manually adjusted mode, the welding current can be set independently from the timeframe. You can choose a welding period between 0.2-2 seconds. The LED-display helps you to always keep the voltage in check.

Se mer Vis færre

The dent puller has a welding gun with attachments for carbon electrodes, washers or pins and a dinging hammer. These attachments allow you to straighten out a variety of different bumps and dents. The cable assembly has a length of 1.75m to ensure that you can move around freely. The same applies to the ground cable, which has a length of 1.6m.

Se mer Vis færre

The workbench stands on 4 wheels, two of which are freely moveable. The device and its accessories can be placed onto two storage areas. The extensive accessories can be stowed into the case that is included in the delivery.

Se mer Vis færre

  • For pulling dents and bumps from car chassis
  • For car repair shops and paint shops
  • 3 welding current settings with up to 4000A / Effective dinging hammer with hook
  • Easy to swap attachments / Digital, intuitive to operate touch-control panel
  • Three welding stages (low/medium/high) / LED-Voltage display
  • Automatic and manually adjustable settings / Undercarriage with two shelves

Dent puller spot welder med arbeidsbenk - 4000A

Nobody is happy, when there is a dent in their car! The professional dent puller S-SPOTTER 4000 by MSW remedies this - with 400V. Even more complicated car body damage on the chassis can be easily removed, as the dent puller comes fully equipped with many helpful accessories. It is an indispensable device in any car repair shop or paint shop for straightening out bumps and dents.

Model
S-SPOTTER 4000
Item number
6442
Condition
New
Voltage
400V / 2 stages
Frequency
50Hz
Rated input power
16kVA
Output voltage
13V
Rated input current
42A
Max. welding current
4000A
Welding current setting
Low/Medium/High
Welding strength
0.8+0.8mm
Time settings
0.2–2s
Safeguard
42A
Length, cable welding gun
1.75m
Length, ground cable
1.6m
Measurements (LxWxH)
48,00 x 61,00 x 94,00 cm
Weight
51,00 kg
Transportation measurements (LxWxH)
61,50 x 53,50 x 87,50 cm
Transportation weight
70,00 kg
Bruksanvisning
Leveranseomfang
  • Dent Puller Spot Welder S-SPOTTER 4000
  • Multifunctional gun, incl. 1.75m cable
  • Ground cable, 1.6m
  • Dinging hammer
  • Carbon electrode connection
  • 3X carbon electrodes
  • Disc attachment
  • Attachments for dinging stars
  • 10X dinging stars
  • 15X washers, 10mm
  • 15X washers, 12 mm
  • Wrench
  • Hook for pulling
  • Toolbox
  • Instruction manual

Vær den første til å skrive en produktanmeldelse



Legg igjen en anmeldelse (5 stjerner er høyest, 1 er lavest)
Klikk på lenken som sendes til din e-postadresse og bekrefte din kommentar! Den kommer att publiseres etter verifisering.

Die mit einem * markierten Felder sind Pflichtfelder.

Expondo-ekspert

Fortsatt usikker?

Våre eksperter står klar til å hjelpe.
Dette produktet
  • Welding current 4000A
  • Digital display
  • Automatic/manual operation
  • Welding time 0.2–2s
  • 3 welding current settings

Varen er på lager, leveringstid ca. 6-10 arbeidsdager

Dent puller spot welder med arbeidsbenk - 4000A

Dent puller spot welder med arbeidsbenk - 4000A

13899,00 NOK

Varen er på lager, leveringstid ca. 6-10 arbeidsdager

  • Welding current 4000A
  • Digital display
  • Automatic/manual operation
  • Welding time 0.2–2s
  • 3 welding current settings
  • Effekt 1 100 watt
  • Digital skjerm
  • Automatiske/manuelle innstillinger
  • Sveisetid: 0–99 min
  • 10 forhåndsinnstilte funksjoner

Varen er på lager, leveringstid ca. 7-10 arbeidsdager

Dent Puller Spot Welder - 3 500 A - 400 V

Dent Puller Spot Welder - 3 500 A - 400 V

(1)
8799,00 NOK

Varen er på lager, leveringstid ca. 7-10 arbeidsdager

  • Effekt 1 100 watt
  • Digital skjerm
  • Automatiske/manuelle innstillinger
  • Sveisetid: 0–99 min
  • 10 forhåndsinnstilte funksjoner
  • Sveisestrøm 5 000 A
  • Digital skjerm
  • Automatisk/manuell drift
  • Sveisetid 0,01–999 s
  • 10 standardinnstillinger

Varen er på lager, leveringstid ca. 6-10 arbeidsdager

Bulkutretter med arbeidsbenk - 5 000 A

Bulkutretter med arbeidsbenk - 5 000 A

(1)
16099,00 NOK

Varen er på lager, leveringstid ca. 6-10 arbeidsdager

  • Sveisestrøm 5 000 A
  • Digital skjerm
  • Automatisk/manuell drift
  • Sveisetid 0,01–999 s
  • 10 standardinnstillinger