Self Leveling Laser - 10 m

Artikkelnummer EX20030341 / Modell: SBS-LL-10

Self Leveling Laser - 10 m

  • Artikkelnummer EX20030341
  • Modell: SBS-LL-10
  • I produktserien siden: 2019
 
 
 
839,20 NOK

inkl. mva inkl. frakt*

Varen er på lager, leveringstid ca. 5-8 virkedager

Self Leveling Laser - 10 m

Høydepunkter og nøkkelfakta

Highlights

  • Automatic self-leveling in just a few seconds – fast and exact work
  • Large range – 10 m and rotates 360°
  • Incl. tripod – 3-level height settings and non-slip rubber feet
  • Horizontal and vertical alignment
  • Carrying case for convenient and safe transport

Keyfacts

Cross Line Laser with Tripod and Carrying Case - 10 m

The self-leveling cross line laser with tripod SBS-LL-10 has everything you need for precise aligning, marking and installing. The laser helps you to align various objects, including pictures or shelves. This instrument is also useful for interior design, on building sites or for putting patterns on facades. You especially need precise guidelines when tiling bathrooms or kitchens so that the tiles can be laid perfectly straight. The absolutely straight laser lines remain constantly perpendicular and the cross line laser levels itself within seconds. The laser head can also be turned 360 degrees. With a measurement accuracy of ± 0,5 mm/m, the cross line laser delivers exact results within a working area of 10 m. With this measuring instrument, Steinberg, your partner for industrial equipment and measurement technology, offers a high-quality product that delivers reliable long-range measurement results.

Easy to use, exact orientation, precise measurement results

 

The cross line laser with tripod is easy to operate and takes very little time to assemble or take apart. The device is ready to use in no time thanks to the practical on and off switch for both the horizontal and vertical line. The laser can be set to the desired height and at an angle up to 360° using the control knob.

 

The cross line laser projects precise vertical and horizontal laser lines or a laser cross with an accuracy of ± 0.5 mm/m. It can determine areas as well as angles and enables an exact display of the space's dimensions. The two laser lines can be separately turned on and off. With the additional tilt function, you can also align diagonals, for example stairs or roof slopes.

Tekniske detaljer

Modell
SBS-LL-10
Artikelzustand
B-Ware
Material
Kunststoff, Aluminiumguss
Klasse Laser
Klasse II
Stativgewinde
M16
Selbstnivellierungszeit
< 8s
Batterie
2 x Mignon AA / LR6
Betriebsdauer
31 Stunden
Wellenlänge
650 nm
Laserausgangs
≤1mw
Toleranz
± 0,5 mm/m
Der Winkel zwischen den beiden Linien
90 °
Max. Innenmessabstand (vertikal)
8 m
Max. Innenmessabstand (horizontal)
10 m
Außenmessabstand
10 m
Minimal- / Maximalhöhenniveau Leitung zu messen
468/1.236mm
STATIV
Max. Länge (gefaltet)
1,120 mm
Min. Länge (gefaltet)
573 mm
Breite (gefaltet)
142 mm
Höhe (gefaltet)
95 mm
Max. Höhe (aufgeklappt)
1302 mm
Min. Höhe (aufgeklappt)
537 mm
Max. Breite (ungefalteten)
549 mm
Min. Breite (ungefalteten)
261 mm
Maße (LxBxH)
60 x 67,5 x 130 cm
Gewicht
1,1 kg
Versandmaße (LxBxH)
52 x 13,5 x 28 cm
Versandgewicht
2,7 kg

How is this electrical instrument powered?

The cross line laser runs on two AA batteries.

How is this electrical instrument powered?

The cross line laser runs on two AA batteries.

How long is the operating time with the batteries?

The cross line laser can be used for up to 31 hours.

How long is the operating time with the batteries?

The cross line laser can be used for up to 31 hours.

How long is the operating time with the batteries?

The cross line laser can be used for up to 31 hours.

How long is the operating time with the batteries?

The cross line laser can be used for up to 31 hours.

Leveranseomfang

  • Cross Line Laser SBS-LL-10
  • Tripod
  • Base
  • Carrying case
  • Instruction manual