Arc Welder - 200 A - TIG Liftarc

The arc welder S-WIGMA 200D by Stamos Selection combines power - up to 200 amps - and a compact, easily transportable design. You can complement the arc welder with the TIG welder with Liftarc ignition and the welding torch from our shop.

The welder is operated via a digital menu on a large LED display. The potentiometer for the seamless adjustment of the welding current between 10 and 200 amps is part of this. Clearly arranged keys allow you to comfortably switch between MMA and TIG welding, or choosing the safety function VRD.

The E-Hand or MMA device welds materials like steel, iron, cast iron, nickel, copper or copper alloy from 1.5 mm thickness. You can use the welder in a wet working environment, like an excavation pit or sewer systems, because the safety function VRD (Voltage Reduction Device) reduces the open-circuit voltage which automatically starts up at the beginning and switches back to a safe level when the work is down.

The HOT-START-function of the electrode welder procures an automatic and short-term increase of the welding current. Thanks to this “Hot Start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. You get perfect welding results from the first try.

The ARC FORCE and ANTI-STICK functions further optimize the welding results. The ARC FORCE regulates the arc sensor and adapts it to the perfect density for the respective material. The results are clean and durable welds.

The ANTI-STICK-function prevents overheating and the clogging of electrodes with the welding material through switching off the welding current. You do not need any protective gas. The MMA welder can be used and will work at great precision, even in adverse circumstances, for example with strong winds. This welding process is suitable for iron, steel including its alloys, cast iron, nickel, and copper alloys from 1.5 mm.

The 4m cable assembly, that can also be ordered in our shop, allows you to add an additional welding mode to this welder: TIG welding with Liftarc ignition.

TIG welding is for when you need or want especially clean welds, with minimal contamination, that are straight and leave sharp edges. There is no development of slags, therefore the device does not require additional cleaning. Sparks, splashes and open flames are reduced to a minimum.

Almost every metal and alloy can be welded, for example magnesium, copper, nickel, titanium and steel. Very thin material, from 1 millimetre, can be TIG welded. You will be able to weld in many different positions, lying, over your head, vertically and horizontally. You’re always in control of the welding.

The Liftarc ignition is one of the most special functions of the welder. It has many advantages over high frequency ignitions. It is not influenced or incapacitated by nearby electronic devices, for example by smartphones, computers or control panels. There are neither tungsten inclusions nor ignition problems in case the cable assembly fails. Damage to the electrode tip is thereby avoided.

The welder is situated inside a casing made from powder-coated steel. It is therefore very durable, even under difficult outdoor conditions. The device is cooled with a high-powered ventilator that prevents overheating.