B-varer Combined Welder - TIG 160 A - CUT 40 A - MMA - PRO
4039,20 NOK

B-varer Combined Welder - TIG 160 A - CUT 40 A - MMA - PRO

Leverandør: Stamos Pro Series | Artikkelnummer EX20020015 | Modell: S-MULTI 41P

Statt: 5049,00 NOK Du sparer 1009,80 NOK 4039,20 NOK
eller

184,95 NOK /måned

Lær mer

Inkl. mva, avgifter og fraktkostnader*

B-varer

Våre B-varer er stort sett returnerte varer eller produkter som er blitt brukt til utstilling. Det kan forekomme mindre bruksmerker eller små riper. Alt blir testet før det blir lagt ut for salg igjen. Retur- og reklamasjonsretten gjelder som normalt.

Produkt-highlights

  • TIG / Plasma / MMA
  • PRO series: 8 m cable
  • 160 A/40 A/230 V
  • Hot Start
  • Overheat protection

Maximum mobility for welding and cutting metals

 

The combined welder reaches up to 160 A with a duty cycle of 60 percent when welding. If the power is reduced to 124 A, the duty cycle can be increased to the point where you can weld without interruption. Also with a duty cycle of 60 percent you can cut metals with 40 amps; for longer cutting jobs you would have to reduce the cutting current to 30 amps.

Se merVis færre
 

The welding machine is equipped with 8 metre-long cables and cable assemblies. Due to its unique length, the device offers maximum freedom of movement during welding. The convenient handle also ensures additional mobility when using the device.

Se merVis færre
 

The TIG welding method is available for welding with shielding gas, with which you can achieve particularly clean weld seams. You can select a gas post-flow time of 2.5 or 5 seconds using a rocker switch. You can weld almost all metals and their alloys starting from 0.5 millimetres, including magnesium, copper, nickel, titanium and steel. In practice, you can weld in a variety of positions: You can maintain control over all welding functions whether you're welding lying down, overhead, vertical or horizontal.

Se merVis færre
 

The welding machine shows its high technical standards right from the start. The high-frequency ignition (HF) for TIG welding and plasma cutting guarantees a reliable start for the arc, meaning that ignition happens without contact with the workpiece. And thanks to the proven MOSFET technology, the welding machine achieves an energy efficiency of 93 percent. This stable power supply is, among other things, a guarantee for excellent welding quality.

Se merVis færre
 

With a cutting depth of 12 mm, the plasma cutter is equipped for demanding repair and renovation tasks as well as for efficient use in production. With an air pressure of 4.5 bar, it achieves a stable plasma arc that produces high-quality cuts.

Se merVis færre

Flexible cutting without gas with an electrode

 

No additional gas is required for MMA (Manual Metal Arc) welding, enabling you to use it outdoors even in strong wind. With this welding method, the welder generates a very stable current, all the while securely maintaining the voltage. As a result, very good welding results are achieved with a variety of metals from a workpiece thickness of 1.5 millimetres.

Se merVis færre
 

The hot start function on the electrode welder ensures an automatic and short-term increase of the welding current at the start of the welding process. Thanks to this “hot start”, the starting point is immediately heated to the optimal temperature and the electrodes do not clog. This creates a clean, stable weld from the very first moment.

Se merVis færre
 

The device is equipped with an overheat protection. The warning light lights up if the duty cycle is exceeded and the device is becoming overheated, or in the event of a sudden malfunction. The air cooling also provides additional safety during operation.

Se merVis færre

Egenskaper

  • Versatile—thanks to TIG, MMA and plasma
  • Flexible—maximum freedom of movement thanks to 8 metre-long cable and cable assemblies
  • High-performance—powerful at 60 % duty cycle
  • Contactless—high-frequency ignition for TIG and plasma
  • Professional—MMA welding with hot start

Rabatt: 20%

Combined Welder - TIG 160 A - CUT 40 A - MMA - PRO

Count on quality and maximum mobility with the combined welder S-MULTI 41P from the Stamos Pro Series. With the 3-in-1 welder, you can reliably weld and cut metals. This enables you to carry out a variety of metalworking tasks with just one device. The TIG and MMA welding methods are available for welding, for cutting you can use a plasma cutter with up to 40 amperes.

Model
S-MULTI 41P
Condition
B-varer
Voltage
230 V / 1 phase
Frequency
50/60 Hz
Rated input current
17 A
Max. input current
24 A
Rated input power
3,7 kVA
Max. input power
5,2 kVA
Function
TIG
MMA
Plasma Cutting
Ignition
HF
Contact
HF
Open circuit voltage
56 V
56 V
230 V
Welding current
10 - 160 A
10 - 160 A
10 - 40 A
Compressor connection
-
-
4,5 bar
Gas flow
-
-
170 L/min
Max. electrode diameter
0,5 - 3,2 mm
1,6 - 4 mm
-
Cutting capacity at max. 50 A
-
-
1 - 12 mm
Welding thickness
1,6 - 6 mm
1,6 - 6 mm
-
Operating time / duty cycle
60 %
Cutting / welding performance at 60 % duty cycle
160 A
160 A
40 A
Cutting / welding performance at 100 % duty cycle
124 A
124 A
30 A
Cutting torch (Ø connection)
PT-31 (16 mm)
Hot start
Yes
Cooling system
Fan
Power factor
0.93
Protection class
IP21
Dimensions (LxWxH)
20 x 49 x 31 cm
Weight
22,35 kg
Shipping dimensions (LxWxH)
80,5 x 29,5 x 42 cm
Shipping weight
25,4 kg
Teknisk tegning
Leveranseomfang
  • Combined Welder S-MULTI 41P
  • Electrode holders with cable: 8 m
  • Plasma torch with professional cable assembly: 8 m
  • TIG torch with cable assembly: 8 m
  • Earth cable with clamp: 8 m
  • Air hose: 3.7 m
  • Pressure gauge
  • Pressure valve
  • Wear parts for TIG torch
  • 3 clamping sleeves (1.6 / 2 / 2.4 mm)
  • Clamping sleeve holder
  • 3 ceramic gas nozzles (4/5/6 mm)
  • Long torch cover
  • Short torch cover
  • 2 nozzles and electrodes for plasma
  • Ceramic caps and swirl rings for plasma
  • Accessory pocket
  • Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Se merVis færre
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Se merVis færre
 
GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Se merVis færre
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR

 

 
MMA WELDING CABLE CONNECTOR

 

 
TIG TORCH CONNECTOR

 

 
CUTTING TORCH CONNECTION

 

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
WELDING CURRENT

 

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
HOT START

Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.

Se merVis færre
 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Se merVis færre
 
MMA WELDING

Electrode welding with a coated electrode.

 
PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

 
POWER SWITCH

 

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

 
PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

Med Stamos produkter kan du skille eller kombinere materialer effektivt og meget nøyaktig. Sortimentet inkluderer alt fra profesjonelle loddestasjoner, høyprofilerte sveiser og presise plasmaskjærer til passende tilbehør. La deg overbevises av funksjonaliteten, kvaliteten, allsidigheten – og ikke minst de gunstige priserne - hos våre profesjonelle produkter. Våre videoer viser våre populæreste produkter  i aksjon!

What does the Stamos Pro Series stand for?

The welders from the Pro Series are designed for professionals who need high-quality welding machines. For maximum welding comfort, all Pro Series units are equipped with 8 meters of cables and cable assemblies to meet all space requirements during welding.

Do I need a welding trolley for this device?

If you use the welding equipment primarily for TIG welding, a welding carriage is advisable as you will need a gas cylinder for welding.

Vær den første til å skrive en produktanmeldelse



Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.

Gesamtansicht von Plasma Ersatzteilset - CUT 40 50 - klein
749,00 NOK
Inkl. mva, avgifter og fraktkostnader
Gesamtansicht von Plasma Ersatzteilset - CUT 40 50 - mittel
915,00 NOK
Inkl. mva, avgifter og fraktkostnader
Gesamtansicht von Plasma Ersatzteilset - CUT 40 50 - mittel
1035,00 NOK
Inkl. mva, avgifter og fraktkostnader
Gesamtansicht von WIG Ersatzteilset - Spannhülsen bis 3,2 mm
899,00 NOK
Inkl. mva, avgifter og fraktkostnader
Dette produktet
  • TIG / Plasma / MMA
  • PRO series: 8 m cable
  • 160 A/40 A/230 V
  • Hot Start
  • Overheat protection

Varen er på lager, leveringstid ca. 5-8 virkedager

B-varer Combined Welder - TIG 160 A - CUT 40 A - MMA - PRO

B-varer Combined Welder - TIG 160 A - CUT 40 A - MMA - PRO

Statt: 5049,00 NOK 4039,20 NOK

Varen er på lager, leveringstid ca. 5-8 virkedager

  • TIG / Plasma / MMA
  • PRO series: 8 m cable
  • 160 A/40 A/230 V
  • Hot Start
  • Overheat protection
  • TIG / Plasma / MMA
  • BASIC
  • 180 A / 230 V
  • welding thickness: 8 mm
  • power ventilators

Varen er på lager, leveringstid ca. 5-8 virkedager

Kombisveiseapparat - TIG 180 A - Cut 50 A - MMA

Kombisveiseapparat - TIG 180 A - Cut 50 A - MMA

(1)
5279,00 NOK

Varen er på lager, leveringstid ca. 5-8 virkedager

  • TIG / Plasma / MMA
  • BASIC
  • 180 A / 230 V
  • welding thickness: 8 mm
  • power ventilators
  • TIG/Plasma/MMA
  • PRO Series - 8 m
  • 180 A / 230 V
  • Sveisebredde: 8 mm
  • Kraftfulle vifter

Varen er på lager, leveringstid ca. 5-8 virkedager

Kombi sveiseapparat - TIG 180 A - Cut 50 A - MMA - PRO

Kombi sveiseapparat - TIG 180 A - Cut 50 A - MMA - PRO

5599,00 NOK

Varen er på lager, leveringstid ca. 5-8 virkedager

  • TIG/Plasma/MMA
  • PRO Series - 8 m
  • 180 A / 230 V
  • Sveisebredde: 8 mm
  • Kraftfulle vifter