B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
6447,20 NOK Inkl. mva 8059,00 NOK

B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition

Leverandør: Stamos Power ² | Artikkelnummer EX20020129 | Modell: S-CUTTER 90

B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition
Spill video
Klikk for å se bildene
Statt: 8059,00 NOK Du sparer 1611,80 NOK 6447,20 NOK Statt: 8059,00 NOK
eller

295,22 NOK /måned /mo with Klarna

Lær mer

Inkl. mva

B-varer

Våre B-varer er stort sett returnerte varer eller produkter som er blitt brukt til utstilling. Det kan forekomme mindre bruksmerker eller små riper. Alt blir testet før det blir lagt ut for salg igjen. Retur- og reklamasjonsretten gjelder som normalt.

Produkt-highlights

  • Plasma
  • POWER
  • 400 V
  • Cutting current: 20 - 90 A
  • Cutting thickness: 1 - 25 mm

  • for cutting metals such as steel, stainless steel, copper, aluminium, etc.
  • IGBT Inverter Technology
  • current can be steplessly regulated
  • powder coated steel sheet casing
  • robust and compact design
  • easy handling
  • delivery package: plasma torch P80, earth terminal, electrode, nozzle, gas pipe
  • high voltage plug not included

You need a precise, compact and powerful plasma cutter? One that can be used for industry, craft trades and hobby workshops? The S-CUTTER 90 by Stamos Germany has a maximum cutting strength of 25 mm. A light arc takes over the cutting and separating. This arc is started with a high frequency ignition and develops under high electrical voltage between electrode and base material. To increase intensity and stability, additional pressurised air is added. The S-CUTTER 90’s welding current can be steplessly and exactly regulated between 20 and 90 ampere. Thus the device can be ideally adjusted to your needs. The robust and compact construction and the weight of only 34 kg make the plasma cutter easy to transport and enable varied possibilities for use.

You need a precise, compact and powerful plasma cutter? One that can be used for industry, craft trades and hobby workshops? The S-CUTTER 90 by Stamos Germany has a maximum cutting strength of 25 mm. A light arc takes over the cutting and separating. This arc is started with a high frequency ignition and develops under high electrical voltage between electrode and base material. To increase intensity and stability, additional pressurised air is added. The S-CUTTER 90’s welding current can be steplessly and exactly regulated between 20 and 90 ampere. Thus the device can be ideally adjusted to your needs. The robust and compact construction and the weight of only 34 kg make the plasma cutter easy to transport and enable varied possibilities for use.

Model
S-CUTTER 90
Condition
Factory second
Rated Input Voltage
400 V, 3-Phase(s)
Input Frequency
50/60 Hz
Rated Input Current
14,7 A
max. Input Current
19,1 A
Rated Input Power
9,5 kVA
max. Input Power
12,6 kVA
No-load Voltage
233 V
Cutting Current
20 - 90 A
Duty Cycle
60 %
Cutting Current at 100% Duty Cycle
69,7 A
Cutting Current at 60% Duty Cycle
90 A
Ignition
HF – High Frequency
Cutting Strength
1 - 25 mm
Cutting Width
1,2 mm
Air Flow
240 l/min
Air Pressure
4,5 bar
Length Cable Package
5 m
Length Earth Cable
3 m
Length Power Cable
2 m
Device Cooling
Aeration
Torch Cooling
Air
Power Factor
0,93
Efficiency (under Rated Power)
≥ 0,85
Insulation Class
F
Protection Class
IP21
Measurements (LxWxH)
54 x 28 x 46 cm
Weight
30,3 kg
Shipping Measurements (LxWxH)
66,3 x 46,2 x 52,5 cm
Shipping Weight
36,85 kg
Teknisk tegning
Leveranseomfang
  • S-CUTTER 90
  • ground cable with clamp
  • hose package
  • accessories (see pictures)
  • instruction manual

The following accessories can be used for the Plasma Cutter S-CUTTER 90 by Stamos Power:

Art. No.
Article
2124
Plasma Spare Parts Set - CUT 85 125 - H / CNC

The following accessories can be used for the Plasma Cutter S-CUTTER 90 by Stamos Power:

Art. No.
Article
2124
Plasma Spare Parts Set - CUT 85 125 - H / CNC

Med Stamos produkter kan du skille eller kombinere materialer effektivt og meget nøyaktig. Sortimentet inkluderer alt fra profesjonelle loddestasjoner, høyprofilerte sveiser og presise plasmaskjærer til passende tilbehør. La deg overbevises av funksjonaliteten, kvaliteten, allsidigheten – og ikke minst de gunstige priserne - hos våre profesjonelle produkter. Våre videoer viser våre populæreste produkter  i aksjon!

Vær den første til å skrive en produktanmeldelse



Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.

Expondo-ekspert

Fortsatt usikker?

Våre eksperter står klar til å hjelpe.
21 93 53 21
Ma - Fr 10:00-16:00
Dette produktet
  • Plasma
  • POWER
  • 400 V
  • Cutting current: 20 - 90 A
  • Cutting thickness: 1 - 25 mm

Varen er på lager, leveringstid ca. 7-13 virkedager

B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition

B-WARE Plasma Cutter - 90 A - 400 V - Pilot Ignition

Statt: 8059,00 NOK 6447,20 NOK

Varen er på lager, leveringstid ca. 7-13 virkedager

  • Plasma
  • POWER
  • 400 V
  • Cutting current: 20 - 90 A
  • Cutting thickness: 1 - 25 mm
  • Mål: 120 x 40 x 65 cm
  • 2 skyvedører i rustfritt stål
  • 1 mellomhylle og 1 bunnhylle
  • inkl. monteringsmateriale

Varen er på lager, leveringstid ca. 9-13 virkedager

von links von Wandhängeschrank - 120 cm

B-WARE Veggskap - 120 cm

Statt: 7495,00 NOK 5996,00 NOK

Varen er på lager, leveringstid ca. 9-13 virkedager

  • Mål: 120 x 40 x 65 cm
  • 2 skyvedører i rustfritt stål
  • 1 mellomhylle og 1 bunnhylle
  • inkl. monteringsmateriale