Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
7420,50 NOK Inkl. mva, avgifter og fraktkostnader*

Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES

Leverandør: Stamos Power ² | Artikkelnummer EX18000212 | Modell:

Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Aluminiumsveiseapparat - Sett - 200 A - 230 V - Puls - 2/4 Takt + Sveisemask– Carbonic - PROFESSIONAL SERIES
Klikk for å se bildene
7420,50 NOK
eller

339,77 NOK /måned /mo with Klarna

Lær mer

Inkl. mva, avgifter og fraktkostnader*

  • Gratis forsendelse til Norge

    ?

    Varen er på lager, leveringstid ca. 5-10 virkedager

  • 30 dagers returrett

    ?
  • 3 års garanti

Produkt-highlights

  • TIG AC-DC / MMA
  • POWER
  • 200 A / 230 V
  • 2/4 tact
  • power ventilators

Egenskaper

  • professional device for TIG AC/DC or MMA Welding
  • 220 Ampere
  • compact and handy design
  • robust steel case with integrated handle
  • pulse function for better results
  • low weight – mobile use
  • Adjustable helmet
  • Visor-face distance adjustable
  • Light protection DIN 4 – 8 or DIN 9 - 13
  • 100 x 65 mm field of view
  • Viewing angle adjustable
  • Light protection for all common welding processes
  • Delay time (0.25 - 0.8 s)
  • Switching time 1 / 30,000 s
You will save up to 3% when purchasing this set, compared to a single item order

Welder

With the S-TIG 220 Welder by Stamos Power you invest in a professional tool for TIG and MMA Welding. With this powerful welder you have the possibilities to work in the alternating or direct current mode, depending on the metal. With the alternating current (AC) you can process light metals such as aluminium and titan. Direct current (DC) can be used for welding more robust metals such as steel, copper or brass. The pulse function enables precise and clean working especially on light metals because it momentarily increases the power without changing the temperature. Next to TIG welding you can also weld with coated electrodes. The robust and compact inverter design enables mobile application on construction sites and similar workplaces.

+

Welding helmet

The Carbonic welding helmet by the Professional Series from Stamos Germany - the best choice for professional and hobby welders

The automatic Carbonic welding helmet from the Professional Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).

In addition, the automatic welding helmet Carbonic is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and a CR2450 battery. The welding helmet works with a particularly wide range of light protection, which can be flexibly adjusted from DIN 4 - 8 or from DIN 9 - 13. The size of the screen is an extraordinary 100 x 65 mm. In this way, you can always keep an overview of all the essential details.

The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of theCarbonic is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.

In addition, Professional Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.

The automatic welding helmet Carbonic can be used with all common welding procedures and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down. Carbonic stands out as early as 3 amps. Whether you are an artisan, or want to use the welding helmet for private use or to be used in the workshop, the Carbonic combines all the necessary protection mechanisms and impresses with its quality and longevity.

 
Model
S-TIG 220
Item Number
2125
Condition
New
Rated Input Voltage
230 V, 1-Phase
Input Frequency
50/60 Hz
Rated Input Power
23,7 A (TIG)
36,3 A (MMA)
Max. Input Current
30,8 A (TIG)
47,2 A (MMA)
Rated Input Power
5,1 kVA (TIG)
7,8 kVA (MMA)
Max. Input Power
6,6 kVA (WIG)
10,1 kVA (MMA)
Open-Circuit Voltage
59 V
Welding Current TIG-DC
10 - 220 A
Welding Current TIG-AC
10 - 220 A
Welding Current MMA
10 - 220 A
Duty Cycle
60% (TIG)
60% (MMA)
Welding Current at 100% DC TIG
170 A (TIG)
170 A (MMA)
Welding Current at 60% DC TIG
220 A (WIG)
220 A (MMA)
Impulse Power
10 - 220 A
Impulse Frequency (AC-Mode)
0,5 - 5 Hz
Impulse Frequency (DC-Mode)
0,5 - 5 Hz
Current Balance (AC)
20 - 80%
Gas Post-flow Time
1 - 10 s
Power Decline Rate
-------------------------------
Electrode Diameter
1 - 3,2 mm (TIG)
1 - 4 mm (MMA)
Ignition TIG
HF – High Frequency
Arc-Force
No
Hot Start
No
Connection for Foot Pedal
Yes
Switch for 2-/4-Stroke Mode
Yes
Device Cooling
Power Ventilator
Torch Cooling
Gas
Welding Thickness
10 mm
Power Factor
0,73
Efficiency (under Rated Power)
≥ 0,85
Isolation Class
F
Protection Class
IP21
Measurements (LxWxH)
48 x 24 x 50 cm
Weight
18 kg
Shipping Measurements (LxWxH)
66 x 31,5 x 55 cm
Shipping Weight
27,9 kg
Model
Carbonic
Article number
2987
Condition
New
Material
Plastic
Head fitting
Adjustable
Face-sight-clearance
Adjustable
Field of view
100  x 65 mm
Arc sensors
4
Power supply
Solar and 1 x battery CR2450
Light protection
DIN 4 – 8 / DIN 9 - 13
Light level
DIN 3
Switching time
1/30.000 s
Delay (when lightened)
0,25 - 0,8 s
Minimum welding current
3 A
Optical class
1
Scattered light
2
Homogeneity
1
Viewing angle dependency
1
Grind-Mode
Yes
Operating temperature
-10 to +55 °C
Storage temperature
-20 to +70 °C
Dimensions (LxWxH)
48 x 24 x 50 cm
Weight
18 kg
Shipping dimensions (LxWxH)
66 x 31,5 x 55 cm
Shipping weight
27,9 kg
Leveranseomfang
  • S-ALU 220
  • ground cable with clamp, 3 m
  • electrode holder, 3 m
  • TIG torch, 4 m
  • incl. accessoires (see picture)
  • instruction manual
  • Welding helmet "Carbonic"
  • Instruction manual
 
MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Se merVis færre
 
VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

 
PROTECTIVE GAS

TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.

Se merVis færre
 
EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

 
GROUND TERMINAL CONNECTOR
 
MMA WELDING CABLE CONNECTOR
 
TIG TORCH CONNECTOR
 
FOOT PEDAL CONNECTOR

This unit can also be operated using a foot pedal.

 
SUPPLY VOLTAGE

This device works with a 1-phase connection (230 V +/- 10 %).

 
NON-CONTACT HF-IGNITION

A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.

 
STARTING CURRENT

Value of the arc ignition output current. This current can be adjusted at will. For precision welding, it is recommended to start with reduced power, weld smoothly and eventually adjust the current accordingly.

Se merVis færre
 
WELDING CURRENT
 
FINAL CURRENT

The output current value before the end of the weld. Welding with the final current helps prevent a crater forming at the end of the weld.

 
GAS POST-FLOW TIME

The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.

 
PULSE

This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.

 
PULSE FREQUENCY

The frequency of impulses during pulse mode.

 
PULSE DUTY FACTOR

Relation of pulse duration to period duration.

 
IMPULSE CURRENT

The maximum value of the electric current while in pulse mode.

 
BASE CURRENT

The current which maintains the arc while in pulse mode.

 
POWER FACTOR CORRECTION

This is the percentage difference of the time between the positive and negative direction of the current during a welding period. This feature allows control of the width of the welding seam and the depth of penetration.

Se merVis færre
 
2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

 
4-STROKE

By pressing the torch button the solenoid valve opens. allowing the gas to flow in. The gas pre-flow ignites the arc at the pre-set current. Releasing the burner button initiates a rise in the current to that of the pre-set welding current. The welding process stops once you press the burner button again.

Se merVis færre
 
TIG WELDING

A welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.

Se merVis færre
 
MMA WELDING

Electrode welding with a coated electrode.

 
POWER SWITCH
 
"2T / 4T" SELECTION SWITCH

Choose between the 2T and 4T mode.

 
TIG AC/DC MODE SWITCH

TIG welding is divided into AC (alternating current) and DC (direct current) welding.

 
PULSE FUNCTION SWITCH

Used to switch the pulse function on and off.

 
SWITCH BETWEEN THE WELDING METHODS

By using the SHIFT key the welding mode can be selected.

 
DISPLAY

Shows the welding / cutting parameters.

 
OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

The following accessories can be used with the S-ALU 220 by Stamos Power:

Art. No.
Article
2034
TIG Spare Parts Set - Welding Tips up to 3.2 mm
2086
TIG Spare Parts Set - Welding Tips up to 2.4 mm

Vær den første til å skrive en produktanmeldelse



Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.

Expondo-ekspert

Fortsatt usikker?

Våre eksperter står klar til å hjelpe.
21 93 53 21
Ma - Fr 10:00-16:00