
TIG-sveiseapparat - Sett - 250 A - 230 V - Puls + Sveisemask – Firestarter 500 - ADVANCED SERIES
Leverandør: Stamos Basic | Artikkelnummer EX18000131 | Modell:
Inkl. mva, avgifter og fraktkostnader*
-
Gratis forsendelse til Norge
?Varen er på lager, leveringstid ca. 5-10 virkedager
-
30 dagers returrett
? -
3 års garanti
Egenskaper
- for TIG DC and MMA welding processes
- MOSFET technology
- pulse function
- down slope: current drop adjustable from 0 to 5 seconds
- pulse frequency: pulse frequency adjustable from 0.5 to 25 Hz
- with powerful ventilators
- suitable for all kinds of steel (also alloyed stainless steel)
- Adjustable helmet
- Visor-face distance adjustable
- Light protection DIN 9 - 13
- 98 x 55 mm field of view
- Viewing angle adjustable
- Light protection for all common welding processes
- Delay time (0.25 - 0.8 s)
- Switching time 1 / 30,000 s
Welder
The inverter welder S-WIGMA 250P by Stamos Germany is marked by highest reliability thanks to the robust construction and use of newest technologies. It works with an input voltage of 230 V and, thanks to the stable but light materials, has a weight of only 10,95 kg at 20 x 43 x 29 cm size. The S-WIGMA 250P’s welding current can be regulated between 5 and 250 Ampere so that the device can be ideally adjusted to individual conditions. The TIG welder S-WIGMA 250P works with the MOSFET technology and reaches an energy use efficiency level of 93%. Here the welding seams high quality is ensured through a constant power supply.
+
Welding helmet
The Fire Starter 500 welding helmet by the Advanced Series from Stamos Germany - the best choice for professional and hobby welders
The automatic Firestarter 500 welding helmet from the Advanced Series from Stamos Germany is characterized by its light weight and good response speed. The welding helmet is extremely versatile and can be used within all common welding processes (MIG welding, MAG / CO2 welding, manual welding, TIG welding, plasma cutting and micro plasma cutting).
In addition, the automatic welding helmet Firestarter 500 is known for its long-lasting visibility (cartridges). The cartridges are powered by solar cells and 2 CR2450 batteries. The welding helmet works with an exemplary range of light protection from DIN 9 - 13. The size of the screen is an extraordinary 98 x 55 mm. In this way, you can always keep an overview of all the essential details.
The welding helmet is made of robust plastic. This ensures that the welding mask weighs only about 500 grams and that you do not have to worry about any restrictions or pain during work. A particularly prominent characteristic of the Firestarter 500 is the simple adaptation to every head shape. Also adjustable is the distance between the face and the visor. This guarantees that the helmet sits extremely securely and can be used first-class.
In addition, Advanced Series welding helmets have an outstanding response time of 1 / 30,000 seconds from light to dark. This means that you are always protected from dangerous arcs. The outstanding reaction time also allows for a seamless transition without the eyes being too stressed or requiring a prolonged adaptation time.
The automatic Firestarter 500 welding helmet can be used with not only all common welding processes and also has a practical grind mode. Thus, the helmet can be used for pure roughing, cutting and grinding work without an annoying up-and-down use. Whether you are a craftsman, want to use the welding helmet for private use, or to be used in the workshop, the Firestarter 500 combines all the necessary protective mechanisms and ensures quality and longevity.
- S-WIGMA 250P
- earth terminal, cable length: 3.5 m
- TIG torch, hose length: 4 m
- electrode holder, cable length: 3.5 m
- adapter sleeve 2.0 mm
- adapter sleeve 2.4 mm
- adapter sleeve 3.2 mm
- collet body
- 3 ceramic nozzles (5, 6, 7)
- back cap (short)
- back cap (long)
- mask
- brush
- Welding helmet "Firestarter 500"
- Instruction manual
The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.
Se merVis færrePowerful fans ensure an optimal removal of heat from the unit.
TIG/MIG and MAG welding require a protective gas. Inert gases, such as argon and helium, as well as active gases (for example carbon dioxide) and other mixtures can be used. The solenoid valve regulates the flow of gas. The valve is operated via a button on the torch.
Se merVis færreOn the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².
This device works with a 1-phase connection (230 V +/- 10%).
A non-contact high-frequency ignition in TIG mode ensures a cleaner weld starting point.
The time taken of the output welding current to lower to that of the terminal current.
The time after the weld is finished in which gas continues to flow from the torch; this cools the burner and protects the weld from oxidation.
This function reduces the heat to the material. It is primarily suitable for welding thin plates. If MIG welding is used, it is perfect for aluminium welding.
The frequency of impulses during pulse mode.
The maximum value of the electric current while in pulse mode.
The current which maintains the arc while in pulse mode.
Start the weld by placing pressure on the torch button. Stop the process by releasing the button.
Through automatically boosting the tension at the ignition of the arc, this function facilitates the electrical arc ignition. After ignition, the unit automatically returns to the pre-set voltage.
Se merVis færreA welding method in which the arc is maintained through an electrical current supplied from a non-consumable electrode. The arc is protected from the access of air by an inert gas.
Se merVis færreElectrode welding with a coated electrode.
Used to switch the pulse function on and off.
By using the SHIFT key the welding mode can be selected.
The LED light indicates overheating or a malfunction.
Vær den første til å skrive en produktanmeldelse

Fortsatt usikker?
Våre eksperter står klar til å hjelpe.- Varmebeskyttende hansker
- Okseskinn med bomullsfôring
- 5-finger design
- Tynn tråd
- Størrelse 10 (XL)
Varen er på lager, leveringstid ca. 5-10 virkedager

Sveisehansker TYP A - str. 10/XL
- TIG-erstatningsdeler
- TIG-dyser: 1x (5 mm)
- TIG-dyser: 1x (6 mm)
- TIG-dyser: 1x (7 mm)
- Klemhylser: 3x
Varen er på lager, leveringstid ca. 5-10 virkedager

TIG erstatningsdelesett - klemhylser på 2,4 mm
- MIG-erstatningsdeler
- Strømdyser: 5x (0,6 mm)
- Strømdyser: 5x (0,8 mm)
- Gassdyser: 5x
- Holdefjær: 1x
Denne varen er ikke på lager for øyeblikket

MIG-reservedelsett - S-MIG 190P / S-MIG 250P
- TIG-dyser 5mm
- TIG-dyser 6 mm
- TIG-dyser 7 mm
- 3 klemhylser
Varen er på lager, leveringstid ca. 5-10 virkedager

TIG reservedelsett - klemhylser opp til 3,2 mm
- TIG DC/MMA
- BASIC
- 250 A / 230 V
- Pulsfunksjon
- Kraftfulle vifter
Varen er på lager, leveringstid ca. 5-10 virkedager

TIG Sveiseapparat - 250 A- 230 V - Puls
- TIG/Plasma/MMA
- SELECTION
- 180 A / 230 V
- Sveisebredde: 0,5 - 4 mm
- Kraftfulle vifter
Varen er på lager, leveringstid ca. 5-10 virkedager

Kombi sveiseapparat - TIG 180 A - Cut 40 A - MMA
- TIG – MIG/MAG – MMA - FCAW
- 230 V / 50 Hz
- Sveisestrøm opptil 195 A
- IGBT
- 2/4-takt
Varen er på lager, leveringstid ca. 5-10 virkedager

Kombisveiseapparat - TIG- MIG/MAG - MMA - FCAW - 195 A