expondo.no

Plasma cutter - 120 A - 400 V - Pilot ignition

11968,⁰⁰ NOK

(1)

Forhåndsvisning: Plasma cutter - 120 A - 400 V - Pilot ignition

Plasma cutter - 120 A - 400 V - Pilot ignition

Spill video

360° foto

Statt: 13299,00 NOK Du sparer 1331,00 NOK 11968,⁰⁰ NOK

eller

548,03 NOK /måned

Lær mer

Inkl. mva, avgifter og fraktkostnader*

Gratis forsendelse til Norge
?

Varen er på lager, leveringstid ca. 9-12 virkedager
30 dagers returrett
?

Klar til å sendes Ved bestilling + betaling innen de neste 10 timene 25 minuttene , sendes varene i dag.

Produkt-highlights

Dimensions 200 x 60 x 96 cm
2 Sliding doors
Upstand: 115 mm
Height-adjustable stands
Stainless steel

Cut through steel as if it was butter - with the plasma cutter S-Plasma 120P by Stamos Germany

The plasma cutter is perfectly suited for precisely cutting stainless steel, nickel, titanium, zirconium and other electro conductive metals of up to 32 mm thickness. It generates a very stable light arc with very high temperatures which allows you to cut through thick steel as if it were butter. The cutting current of the plasma cutter S-Plasma 120P is adjustable between 20 and 120 amps which means that the device is adaptable to all conditions. First-class cutting quality, separation cuts and precision. You get perfect cuts, even at the more difficult end parts, because of the high reserve capacity. This high quality allows for better results with less reworks.

Se merVis færre

Saving time and working efficiently is becoming more and more important. Use your time in an effective manner - with the plasma cutter by Stamos Germany. The cutting speed is high, which ensures precise and high-quality weld seams, a deep weld penetration and minimal material distortion. The separate inverter for the auxiliary arc current ensures constant results. The device has a jump-start-function which allows you to start it even during the gas post-flow.

Se merVis færre

Energy efficiency - Expensive plasma gas is a thing of the past

The device is powered by 400 volts. You can also use a generator with a minimum power output of 8 kVA for mobile operation. The plasma cutter is powered with inexpensive pressurized air. You need a compressor with a pressure of ingoing air of 6.2 bar and a passage of air of 170 l/m. This is best achieved with a 10-bar-compressor.

Se merVis færre

The construction stands out for its compact, robust design and its low tare weight of only 38.2 kg. This, and the comfortable handles, is why the plasma cutter can be easily transported. The air-cooled cutting unit has a powder-coated sheet steel casing. The plasma cutter has a 4.2 m ground cable. You can work on a large scale without being hindered by a short cable.

Se merVis færre

Egenskaper

Exact current thanks to the seamless adjustment of the cutting current
High-powered ventilation for efficient cooling
Cost-effective with inexpensive pressurized air
Compact, mobile construction, versatile applications
Jump-start-function, even during the gas post-flow

Plasma cutter - 120 A - 400 V - Pilot ignition

The expert for craft supplies Stamos Germany offers first-class plasma cutters as well as welders. The Pro-range has been developed with inverter technology and is the best choice for maximum energy savings. In workshops, in agriculture and car repair shops, you need a cutting unit that is robust, flexible and reliable. The mobile plasma cutter S-Plasma 120P combines these features. Coated or rusted materials can be easily handled. All you need is a rotary current and pressurized air.

Attention! The device will be delivered without a high current connector!

Model

S-Plasma 120P

Condition

New

Input voltage

400 V, 3-phase

Input frequency

50 / 60 Hz

Rated input current

21 A

Input current, max.

29 A

Rated input power

13,6 kVA

Input power, max.

18,8 kVA

Open-circuit voltage

268 V

Cutting current

20 – 120 A

Duty cycle

60 %

Cutting current at 100 % DC

92 A

Cutting current at 60 % DC

120 A

Ignition

HF - High frequency

Cutting power

32 mm

Kerf width

1,4 mm

Air flow

170 l/min

Air pressure

6 bar

Length, cable assembly

4,2 m

Length, ground cable

4,3 m

Length, power cord connection

1,3 m

Device cooling

Ventilator

Cooling distiller

Air

Power factor

0.93

Efficiency (below rated power)

≥ 0.85

Insulation class

Protection class

IP20S

Dimensions (LxWxH)

57 x 49,5 x 29 cm

Weight

38,2 kg

Shipping dimensions (LxWxH)

67 x 39 x 53 cm

Shipping weight

43,2 kg

Teknisk tegning

Last ned PDF

Leveranseomfang

Plasma cutter S-Plasma 120P
Ground cable with clamp (4.3 m)
Cable assembly (4.2 m)
Air hose
Pressure regulator
Manometer
Plasma cutter torch neck
Plasma cutting point
Ceramic ring
Instruction manual

MOSFET

The welder is equipped with a MOSFET transistor. This technology represents the highest standards of performance combined with compact and lightweight design. The result is 93% efficiency! The welding current is very stable and thus ensures a perfect weld.

Se merVis færre

VENTILATORS

Powerful fans ensure an optimal removal of heat from the unit.

GAS/AIR CONNECTION

For plasma cutting, a gas is required with which the molten metal is blown away from the work surface. Compressed air is a common solution for this. For this purpose, the plasma cutter has a compressor connection.

Se merVis færre

EARTHING SYSTEM

On the back of every welding machine is a screw with an earthing mark. Before use, earth the unit via a cross-section cable, which must be at least 6 mm².

GROUND TERMINAL CONNECTOR

CUTTING TORCH CONNECTION

SUPPLY VOLTAGE

This device works with a 3-phase connection (400 V +/- 10 %).

WELDING CURRENT

2-STROKE

Start the weld by placing pressure on the torch button. Stop the process by releasing the button.

PLASMA CUTTING

The plasma arc melts the metal and the kinetic energy of the compressed air blows the metal aside.

POWER SWITCH

DISPLAY

Shows the welding / cutting parameters.

OVERLOAD / FAULT LED

The LED light indicates overheating or a malfunction.

PRESSURE GAUGE (MANOMETER)

Shows the value of compressed air the compressor delivers to the plasma cutter. The plasma cutter has a pressure reducing valve which regulates the air pressure.

Med Stamos produkter kan du skille eller kombinere materialer effektivt og meget nøyaktig. Sortimentet inkluderer alt fra profesjonelle loddestasjoner, høyprofilerte sveiser og presise plasmaskjærer til passende tilbehør. La deg overbevises av funksjonaliteten, kvaliteten, allsidigheten – og ikke minst de gunstige priserne - hos våre profesjonelle produkter. Våre videoer viser våre populæreste produkter i aksjon!

Which gas is used with the plasma cutter?

With this model, please use only pressurized air.

How much pressurized air is needed?

The plasma cutter needs 175 l/min at 5.5 bar.

4 Basert på 1 anmeldelse(r)

_{Sorter etter...}

Gi anmeldelse ★ ★ ★ ★ ★

Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Gjennomgå av Amazon Customer (7. apr. 2019)

Gjennomgå av Amazon Customer (7. apr. 2019) Tolles Gerät, Informationen zum Gerät sehr spartanisch

Gerät sehr leistungsfähig, Gute Qualität. Können wir nur weiterempfehlen.Anleitung, bzw. generell Informationen für den Einsatz sind Mangelware, nicht vorhanden. Welcher Abstandshalter sind alternativ einsetzbar, welche Ersatzteile gehören zu diesem Typ, Ersatzteil-Sets für 120A und nicht nur für 80A, Auch als Praktiker möchte ich mir nicht erst eigene Erfahrungen für unterschiedliche Einsatzszenarien erarbeiten bzw. Ersatzteile im Internet zusammensuchen müssen. Dazu ist Arbeitszeit heutzutage viel zu teuer. Solche Infos, um, z.B.: Mitarbeiter schneller produktiv werden zu lassen gehören, meiner Meinung nach, einfach zu einem Profigerät dazu.