Hydropneumatisk verkstedspresse - Opptil 50 tonn trykk

Artikkelnummer EX20060303 / Modell: MSW-WP-50T-P

Hydropneumatisk verkstedspresse - Opptil 50 tonn trykk

  • Artikkelnummer EX20060303
  • Modell: MSW-WP-50T-P
  • I produktserien siden: 2017
12231,20 NOK

inkl. mva inkl. frakt*

Varen er på lager, leveringstid ca. 9-12 virkedager

Hydropneumatisk verkstedspresse - Opptil 50 tonn trykk

Whether you wish to bend or press metals, or remove gears, washers and threaded bushings, the MSW WP-50T-P hydro pneumatic workshop press achieves this with ease. The hydraulic pneumatic press...Mer informasjon

Beskrivelse

Whether you wish to bend or press metals, or remove gears, washers and threaded bushings, the MSW WP-50T-P hydro pneumatic workshop press achieves this with ease. The hydraulic pneumatic press with an integrated manometer has a maximum pressing pressure of 50 T and is perfectly suited for use in the car workshops or within any mechanical engineering operation.

The WP-30T-P workshop press offers you a comfortable working area with a width of 615 mm. In order to always be able to work in a comfortable position, the height can be adjusted to a range of 60 - 1,100 mm thanks to a winch. Each adjustable interval has a clearance of 150 mm and is secured in addition to the winch with two bolts. In this way, the press can be comfortably used by persons of different body sizes.

Metals of various types can be bent and straightened with the aid of the hydraulically reducible pressure of up to 50,000 kg. The pressure can be precisely determined by means of the built-in manometer and can be adapted hydraulically or pneumatically by the hand pump. Thus, by a gradual increase in the pressure, a precise pressing result can be achieved. The fully welded construction is very sturdy and ensures a long service life.

The stroke of the pressure piston is 180 mm, so that the pressure can be collected optimally at the processing point. Horizontally, the piston can be adjusted in a range of 280 mm, which makes decentralized pressing possible and thus multiplies the applicability.

Both the work top and the pressure piston are shock-absorbent. After completion of the pressing operation, the piston is brought back into the initial position by an automatic retraction function and is ready for the next working operation.

Tekniske detaljer

Model
MSW-WP-50T-P
Condition
New
Maximum pressure
30 T / 50,000 kg
Working height
60 – 1,100 mm / 7 adjustable positions
Workbench width
615 mm
Piston stroke
180 mm
Horizontal adjustment of the piston
280 mm
Operating pressure (under full load)
624 bar / 9,052 psi
Air pressure range
7,5 – 8,5 bar
Dimensions (LxWxH)
96 x 140 x 190 cm
Weight
243 kg
Shipping dimensions (LxWxH)
193 x 86 x 35 cm
Shipping weight
275 kg
Sist sett