B-varer Tredreiebenk - 400 W - 1010 mm
1823,20 NOK

B-varer Tredreiebenk - 400 W - 1010 mm

Leverandør: MSW | Artikkelnummer EX20060499 | Modell: MSW-WL1000

Statt: 2279,00 NOK Du sparer 455,80 NOK 1823,20 NOK
eller

83,48 NOK /måned

Lær mer

Inkl. mva, avgifter og fraktkostnader*

B-varer

Våre B-varer er stort sett returnerte varer eller produkter som er blitt brukt til utstilling. Det kan forekomme mindre bruksmerker eller små riper. Alt blir testet før det blir lagt ut for salg igjen. Retur- og reklamasjonsretten gjelder som normalt.

Produkt-highlights

  • Power: 400 W
  • Length: 1,010 mm
  • Diameter: 300 mm
  • 4 rotation speeds up to 2,508 r/min
  • Idle speed: 1,470 r/min

The woodworking lathe has the right spin

 

The MSW small lathe has a 400 watts electric engine. This engine has an ideal performance range to carry out a wide range of operations on wooden workpieces. It can process pieces up to a length of 101 centimetres, a working height of 17.5 centimetres and a diameter of 30 centimetres.

Se merVis færre
 

Depending on whether you work on soft wood such as fir or linden or on hard oak wood, the speed can be varied in four stages between 872 and 2,508 revolutions per minute.

Se merVis færre
 

Depending on the length of the workpiece, the carriage of the tailstock can be locked to a large, handy lever. Readjusting the tailstock tip is a quick fix. It is readjusted on a wheel with a crank on the extension of the tailstock spindle. A second lever holds the tailstock in the desired position after the fine adjustment.

Se merVis færre
 

The precise placement of the tool is particularly important for good work results. The tool table like the tailstock, is locked with a lever in the desired position. In order to ensure maximum flexibility, it is also possible to change the orientation of the tool table towards the workpiece. Another lever is available to fix the desired angle.

Se merVis færre
 

It is not entirely safe to operate electrical machines, so safety precautions are particularly important. The lathe has a restart protection, which prevents operation after a power failure or after disconnecting. Before the operation is resumed, the power switch must be pressed again.

Se merVis færre

Egenskaper

  • High-powered 400 watts engine and robust casing
  • Adjustable rotation speed from 872 and 2,508 r/min
  • Easily adjustable tailstock
  • Flexible tool table
  • Clamping disk with a 114 mm diameter
  • Safe operation with a restart protection

Rabatt: 20%

Tredreiebenk - 400 W - 1010 mm

The woodworking lathe MSW-WL1000 by MSW is the ideal tool for processing wooden workpieces with a length of up to 101 centimetres. Axisymmetric workpieces such as spheres, cones, table legs or cups can be put into the desired shape. The lathe is perfect for woodturning enthusiasts, woodturners and commercial users. The speed can be varied depending on the material.

Can I process pieces of wood with a length of up to 1,000 mm?

Yes. The maximum length for pieces of wood is 1,010 mm. Shorter pieces are no problem.

What is the maximum rotation speed?

At the highest level, you can work with a rotation speed of 2,508 r/min.

Vær den første til å skrive en produktanmeldelse



Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.

Dette produktet
  • Power: 400 W
  • Length: 1,010 mm
  • Diameter: 300 mm
  • 4 rotation speeds up to 2,508 r/min
  • Idle speed: 1,470 r/min

Varen er på lager, leveringstid ca. 5-8 virkedager

B-varer Tredreiebenk - 400 W - 1010 mm
Sale %

B-varer Tredreiebenk - 400 W - 1010 mm

Statt: 2279,00 NOK 1823,20 NOK

Varen er på lager, leveringstid ca. 5-8 virkedager

  • Power: 400 W
  • Length: 1,010 mm
  • Diameter: 300 mm
  • 4 rotation speeds up to 2,508 r/min
  • Idle speed: 1,470 r/min
  • Effekt 500 W
  • Lengde 450 mm
  • Diameter 240 mm
  • Turtall opptil 2.700 omdr./min
  • Tomgang 1.465 omdr./min

Varen er på lager, leveringstid ca. 5-8 virkedager

Dreiebenk - 500 W - 450 mm

Dreiebenk - 500 W - 450 mm

4529,00 NOK

Varen er på lager, leveringstid ca. 5-8 virkedager

  • Effekt 500 W
  • Lengde 450 mm
  • Diameter 240 mm
  • Turtall opptil 2.700 omdr./min
  • Tomgang 1.465 omdr./min