B-varer Injector Puller Set

Artikkelnummer EX20060625 / Modell: MSW-IE-3H

B-varer Injector Puller Set
B-varer Injector Puller Set
B-varer Injector Puller Set

B-varer Injector Puller Set

  • Artikkelnummer EX20060625
  • Modell: MSW-IE-3H
  • I produktserien siden: 2017
Statt: 2289,00 NOK Du sparer 457,80 NOK 1831,20 NOK

Inkl. mva, avgifter og fraktkostnader*

Betal inntil 24 avdrag av 83,84 NOK med Klarna

Lær mer

Varen er på lager, leveringstid ca. 5-8 virkedager


Våre B-varer er stort sett returnerte varer eller produkter som er blitt brukt til utstilling. Det kan forekomme mindre bruksmerker eller små riper. Alt blir testet før det blir lagt ut for salg igjen. Retur- og reklamasjonsretten gjelder som normalt.

Rabatt: 20%

Injector Puller Set

The MSW-IE-3H injector puller set from MSW is a special tool set for safely removing Diesel injectors without needing to remove the cylinder head. Thanks to the numerous adapters, this set is suitable for most Diesel car injectors. It is therefore a great addition to your commercial workshop. Even if you are not a professional, don’t worry: You can use this puller set to perform a safe Diesel injector removal without causing any damage or injuries.


There are three different bell hammers included with the injector puller set, which you can use depending on the specific type of injector. Each bell hammer has an individual length and weight and can be used on different engines and with a different effort. There is one hammer with 15 cm in length and 1.6 kg, one with 43.5 cm and 2.7 kg and one with 60 cm and 5.1 kg. With this set of 3 bell hammers you are perfectly equipped for every need.

Safe and easy Diesel injector removal with the MSW-IE-3H injector puller set from MSW


The professional puller set guarantees the safe removal of Diesel injectors. If no such specialized tools are used, damage to the injector and the engine can occur and there is even a risk of injury for the user. This is why you should use the MSW injector puller, specially designed for a safe disassembly.


Thanks to its wide variety of tool elements and adapters, this set can be used with most Diesel engines. Depending on the injection nozzles, you can always assemble the perfect equipment. With the professional puller set you are perfectly equipped for all repairs to various injectors of different sizes.


All tool parts are made from sturdy, durable steel, which guarantees high resistance, even when used with great force. This allows you to remove difficult-to-reach or stuck injectors. The three different bell hammers are each made from chromed steel and are highly corrosion resistant.


The complete set is stored in a practical plastic tool case, which has a customized slot for each item. This means that each tool can be safely and properly stored after use. Additionally, the case can be conveniently transported thanks to its comfortable handle, while strong clips keep the case tightly closed. The carrying case can be used on the go.


Thanks to the high-quality construction of the tools, the large number of individual adapters and three different bell hammers, the puller set provides everything you need for a professional and easy Diesel injector disassembly. The injector puller set MSW-IE-3H by MSW should not be missing from any professional workshop.


  • Universal, facilitates the disassembly of Diesel injectors
  • Three slide hammers of various weights and lengths (up to 5.1 kg / 60 cm)
  • High durability due to high-quality materials
  • Extensive tool-set for various applications
  • Reduced risk of injury and no wear from the removal


Material, adapter
Tempered steel
Material, bell hammer
Chromed steel
Bell hammer
1,6 kg, 15 cm2.7 kg, 43,5 cm5.1 kg, 60 cm
Material, case
Plastic material
Dimensions (LxWxH)
40 x 62 x 10,5 cm
21,2 kg
Shipping dimensions (LxWxH)
64 x 42 x 12,5 cm
Shipping weight
21,7 kg
  • Slide hammer 1.6 kg, length 15 cm
  • Slide hammer 2.7 kg, length 43.5 cm
  • Slide hammer 5.1 kg, length 60 cm
  • Extractor with fork diameter 13.2 x 19 x 109 mm
  • Extractor with fork diameter 12.8 x 19 x 121 mm
  • 5 slit, hexagonal socket wrenches, 100 mm long, in SW 25, 27, 28, 29, 30 mm
  • Injector puller with a hull design with supporting shells, Outer diameter 35 mm, Inner diameter 29 mm, Shaft with M17 x 1.0 external thread
  • 3 removable adapters with external threads M27 x 1.0 and M25 x 1.0
  • 3 removable adapters with internal threads M27 x 1.0
  • Slide hammer adapter for internal, external and grab pullers
  • Tool case
  • Instruction manual

Vær den første til å skrive en produktanmeldelse

Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.