B-varer Elektrisk fliskutter - 800 W - Våt

Artikkelnummer EX20060410 / Modell: T-SAW200G

B-varer Elektrisk fliskutter - 800 W - Våt

  • Artikkelnummer EX20060410
  • Modell: T-SAW200G
  • I produktserien siden: 2018
2551,20 NOK

Nettopris inkl. toll og frakt*

Betal inntil 24 avdrag av 116,81 NOK med Klarna

Lær mer

Varen er på lager, leveringstid ca. 5-8 virkedager

B-varer Elektrisk fliskutter - 800 W - Våt


  • continuously adjustable cutting depth up to32 mm
  • powerful 800 Watt motor
  • continuous angle adjustment with display scale up to 45°
  • diamond cutting disc Ø 200 mm
  • Water Cooling System - For an increased cutting power and less wear of the diamond cutting disc


Rabatt: 20%

Electric Tile Cutter - 800 W - Wet

The electric tile cutter T-SAW200G has been specially designed for easily and safely sawing wall and floor tiles, fine stoneware, split tiles, etc. The tile cutter is equipped with a 230 volt connection and is the perfect tool for professional and DIY work.


With its 800 W power, the engine can reach a rotation speed of 2950 r/min. Consequently, the T-SAW200G tile cutter can deliver precise cuts through tiles of up to 32 mm width.

Precise and safe sawing - with the electric tile cutter T-SAW200G by MSW


The stable floor area of the working table measures 1.020 × 400 millimeters. With its 200 mm and 25.4 mm locating bore, the continuously height adjustable diamond cutting disc is easy to adjust over the readable scale. Two additional diamond cutting discs are included in the delivery.


The highly accurate angular stop allows you to carry out precise, parallel cuts and vary the cut width. Horizontal cutting angles of up to 60 degrees are no problem with the adjustable angular stop. You can work with items of up to 72 cm length.


Water Cooling System - For an increased cutting power and less wear of the diamond cutting disc, the tile cutting machine has a special cooling system. The liquid tank holds 15 litres. The formation of dust is reduced. With this system, both the need for maintenance and the blade exchange costs are reduced.


The diamond cutting disc has a protective cover to ensure work safety. Non-slip rubber knobs further ensure the safety of the tile cutting machine T-SAW200G. The working surface is covered in rubber as well, to prevent the cut material from slipping.


Mobility – Transporting this device from one location to another is remarkably easy, thanks to built-in wheels and foldable legs.

Factory second
230 V / 50 Hz
Rated input power
2,000 W
800 W
Protection class
Working mode
S2 / 20 min
Engine, insulation class
Max. rotation
2,950 rpm
Max. cut depth at 90°
32 mm
Max. cut depth at 45 °
28 mm
Diamond cutting disc, inclination angle
0 - 45 °
Maximum cutting length
720 mm
Dimensions, working table
1,020 × 400 mm
Dimensions, shelf
200 × 230 mm
Dimensions, water tank
370 × 565 × 70 mm
Capacity, water tank
15 l
Diamond cutting disc, diameter
200 mm
Diamond cutting disc, location bore
25,4 mm
Diamond cutting disc, width
2,5 mm
Sound power level LWA / (deviation K)
108 dB (A) / 3dB (A)
Sound pressure level LWA / (deviation K)
95 dB (A) / 3dB (A)
VDE plug
3,4 m/s2 / 1,5 m/s2
Power cable, length
2 m
Vibration emission (deviation K)
122 x 70 x 108 cm
Dimensions (LxWxH)
31,45 kg
111 x 44 x 38 cm
Shipping dimensions (LxWxH)
34,4 kg
  • Electric tile cutter SAW200G
  • Diamond cutting disc Ø 200 mm
  • 2 spare diamant cutting discs
  • Mounting materials
  • Instruction manual

Vær den første til å skrive en produktanmeldelse

Gi anmeldelse
Anmeldelser kommer etter en godkjennelsesprosedyre på hjemmesiden

Die mit einem * markierten Felder sind Pflichtfelder.